CERTIFICATE OF WELDING

The person who is competent in this CU shall be able to perform shielded metal arc welding (SMAW) for fillet weld 1F, 2F, 3F, 4F, butt weld 1G and 2G positions on carbon steel or stainless steel material. Upon completion of this competency unit, trainees will be able to:-

1.         Carry out safety assessment at work area

2.         Comply to work instruction and relevant Welding Procedure Specification (WPS)

3.         Verify base metal material used

4.         Verify consumable as specified

5.         Check SMAW equipment and accessories functionality

6.         Perform SMAW process

7.         Perform visual inspection and testing(destructive test)

8.         Carry out back gouging, grinding and back welding as required in accordance with test specimen

9.         Compile work completion checklist

The person who is competent in this CU shall be able to perform shielded metal arc welding (SMAW) for 3G and 4G positions on carbon steel or stainless steel material. Upon completion of this competency unit, trainees will be able to:-

 

1.             Carry out safety assessment at work area

2.             Comply to work instruction and relevant Welding Procedure Specification (WPS)

3.             Verify base metal material used

4.             Verify consumable as specified

5.             Check SMAW equipment and accessories functionality

6.             Perform SMAW process

7.             Perform visual inspection and testing (destructive test)

8.             Carry out back gouging, grinding and back welding as required in accordance with test specimen

9.             Compile work completion checklist